NINJA CUSTOM TOOL SET 26 Piece

Kobori Ryu Roppo Gata                小堀流六法形

These authentic 6 point stars of Kobori Ryu are produced by a combination of machine and custom finishing. Intended for heavy use, 

SPECIFICATIONS:

Dimensions - Measuring approximately 4" from farthest point to point
Color - Black Oxide plated
Steel - 10 Gauge steel

IGA JUJI

Authentic, custom-made Koto Ryu Juji shuirken used by Koga 甲賀流十字手裏 and Iga ninja juji shuriken (4-point, steel throwing star).

Iga and Koga Ninja are famous as the two most influential Ninja of medieval Japan. These shuriken are made of our most durable steel.

This model is the same overall size as the Koga Juji model except the square hole in the middle is 1" size compared to the Koga juji which is 5/8"

SPECIFICATIONS:

* Dimensions - 3.5” measurements from closest tip to tip - 5"     farthest tip to tip
* Square center 1"
* CRS A36 Steel
* 14 Gauge thick / 1.90mm
* Black oxide finish

Kusari fundo LG

This is the larger weight version being 3" long X 3/4" diameter hexagon solid steel weight.

The Manrikigusari was believed to have been developed by Masaki Tarodayu in the 1700's. It is used by several Ko Ryu Budo schools.

Used to snag and snare the opponent as well as strike with the weight. The chain weapon is a versatile weapon in the hands of a skilled practitioner

Can be thrown by swinging overhead or popping like a whip. May also be held concealed in one hand and used to strike.

Kusari-fundo is a handheld weapon used in feudal Japan, consisting of a length of chain (kusari) with a weight (fundo) attached to each end of the chain. Various sizes and shapes of chain and weight were used as there was no set rule on the construction of these weapons. Other popular names are manrikigusari (萬力鏈) ("ten thousand power chain") or just manriki.

SPECS:
* 3" long solid steel hexagon weights
* 3/4" Diameter hexagon solid steel weight
* Black oxide plated or polished silver finish
* 27" Overall length
An essential piece of Ninja Gear

AR400 TETSUMARI LG

Traditional, authentic tetsumari used by Ninja and samurai of feudal Japan. These tetsumari are one of a kind and very special piece. A must for any collector of authentic Ninja tools.Tetsumari means 'Iron Ball' and as such is a ball of spikes.

These Tetsumari are like the Kobori Ryu Roppo Gata. These are a 12 point model. Made of 3/16” AR400 plate steel, 4” from tip to tip. Black oxide plated finish.

SPECS:

* 12-point model
* 4" size
* AR400 plate steel
* Black oxide plated finish

 AR400 CUSTOM THROWING DAGGER

Handmade, beveled edges, and ground smooth finish.  Made of extremely durable AR400 Armor plate steel, 3/16" thick, this custom item can endure rigorous use, and it may be used for regular throwing practice or hand to hand self-defense.

They throw amazingly well!

SPECIFICATIONS:

Dimensions - 7.5" long
Steel - AR400 Plate (very durable)
3/16" - Thick
1/2" - Wide
Black Oxide Plated finish
Double Edged
Sold individually / separately
Custom sharpened, (note) they are not very sharp, not intended to be used as a utility cutting blade. These are made for primarily throwing .

 TETSUBISHI (HAND MADE)

Made in 10 GAUGE thick, heavy-duty steel. very solid construction, each tetsubishi has four points and were traditionally used to slow a following adversary or thrown to create a distraction. These are not the little light weight versions that everyone got used to buying. These are the real deal! I know the cost is much higher then the thin ones. Unfortunately quality solid steel construction is not cheap, the quality of the item and craftsmanship that is put into every single one for sure make them well worth the price.

Each one is custom hand beveled and sharpened on all tips. Set with a weld quality epoxy coupled by the special notch design that interlock each one, be assured they won't be coming apart . Completed with a black oxide plated black finish. These are just large enough to have the potential of being used kakushi or kakute style, may also be thrown as a single piece or hand full at a time.

No matter how they land, there is always a sharp edge pointing up.

SPECIFICATIONS:

• Black oxide plated finish
  
• limited time single piece
• Hand beveled, sharpened all points
• Heavy duty 10 gauge thick steel
• 2" wide from tip to tip
• 1 1/2" tall 

TETSUBISHI 2 BARBED

Made in 10 GAUGE thick, heavy-duty steel. very solid construction, each tetsubishi has four points and were traditionally used to slow a following adversary or thrown to create a distraction. These are not the little light weight versions that everyone got used to buying. These are the real deal! I know the cost is much higher then the thin ones. Unfortunately quality solid steel construction is not cheap, the quality of the item and craftsmanship that is put into every single one for sure make them well worth the price.

Each one is custom hand beveled and sharpened on all tips. Completed with a black oxide plated black finish. These are just large enough to have the potential of being used kakushi or kakute style, may also be thrown as a single piece or hand full at a time.

No matter how they land, there is always a sharp edge pointing up.

SPECIFICATIONS:

* Black oxide plated finish
* Hand beveled, sharpened all points
* Heavy duty 10-gauge thick steel
* 2" wide from tip to tip
* 1 3/4" tall

TETSUBISHI 4 MINI TAPERED POINT

Made in 10 GAUGE thick, heavy-duty steel. very solid construction, each tetsubishi has four points and were traditionally used to slow a following adversary or thrown to create a distraction. These are not the little light weight versions that everyone got used to buying. These are the real deal! Each one is custom tapered to sharp point tip. Completed with a black oxide plated finish. These are just large enough to have the potential of being used kakushi or kakute style, may also be thrown as a single piece or hand full at a time.

No matter how they land, there is always a sharp edge pointing up.

SPECIFICATIONS:

• Black oxide plated finish
• Mini size 1/3 smaller than standard 
  
• Custom tapered points
• Heavy duty 10-gauge thick steel
• 1 1/2" Wide (approximately) tip to tip
• 1" Tall